ADVANTECH PCI-1601BU WINDOWS 7 64BIT DRIVER

ADVANTECH PCI-1601BU DRIVER DETAILS:

Type: Driver
File Name: advantech_pci_35181.zip
File Size: 12.9 MB
Rating:
3.81
36 (3.81)
Downloads: 27
Supported systems: Windows XP (32/64-bit), Windows Vista, Windows 7, Windows 8.1, Windows 10
Price: Free* (*Free Registration Required)

Download Now
ADVANTECH PCI-1601BU DRIVER



Retain the shipping carton and packing material for inspection by the carrier.

ADVANTECH PCI-1601BU DRIVERS WINDOWS 7

After Advantech PCI-1601BU we will make arrangements to repair or replace the unit. When you handle the PCI communication card series, remove it from its protective packaging by grasping the rear metal panel. Keep the antivibration packing.

Whenever you remove the card from the PC, store it in this package for protection. Discharge your body s static electric charge by touching the back of the grounded chassis of the system unit metal before handling the board. You should avoid contact Advantech PCI-1601BU materials that hold a static charge such as plastic, vinyl and styrofoam. Handle the board only by its edges to avoid static damage to its integrated circuits. Avoid touching the exposed circuit connectors. We also recommend that you use a grounded wrist strap and place the card on a static dissipative mat whenever you work with it. Advantech PCI-1601BU

ADVANTECH PCI-1601BU WINDOWS 7 64BIT DRIVER

Advantech PCI-1601BU gives the card default configuration and your options for each jumper How to Set Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch.

Advantech PCI-1601BU Manuals

It consists of Advantech PCI-1601BU metal pins and a small metal clip often protected by a plastic cover that slides over the pins to connect them. To close a jumper you connect the pins with the clip.

To open a jumper you remove the clip. Sometimes Advantech PCI-1601BU jumper will have three pins, labeled 1, 2 and 3. In this case you would connect either pins 1 and 2 or 2 and 3. You may find a pair of needle-nose pliers useful for setting the jumpers.

If you have any doubts about the best hardware configuration for your application, contact your local distributor or sales representative before you make any changes. Figure 2. How to Set Jumpers 29 Chapter 2 40 Advantech PCI-1601BU. If you need to change these Advantech PCI-1601BU, however, see the following sections.

  • PCIU - kS/s, bit, ch Isolated Analog Input Universal PCI Card - Advantech
  • Advantech PCI User manual
  • Support & Download - Advantech
  • Placas PCI
  • Download and update Windows drivers
  • Advantech PCI-1601BU other devices drivers

Otherwise, you can simply install the card. Table 2.

They are the card default settings. The figure 2. See section 2.

RS/ card withstands industrial environments - July - SA Instrumentation & Control

The options are active or passive. In the active mode, the Advantech PCI-1601BU or Rx will generate the current requirement for data transfer over the link.

ADVANTECH PCI-1601BU TREIBER WINDOWS XP

In the passive mode, the current is generated by the card at the other end of the link. A and B are set to be active Rx, and E is set to be active Tx. PCIA-AE / PCIAU-A / Advantech PCI-1601BU / PCIBU-A / PCIA-AE / PCIAU-A / PCIB-AE / PCIBU-A / PCIUP-A2E. Advantech PCIBU Pdf User Advantech PCI-1601BU.

View online or download Advantech PCIBU User Manual.

Related Posts