BIOSTAR G31M+ DRIVER DETAILS:
|File Size:||22.8 MB|
|Supported systems:||Windows Vista, Windows Vista 64-bit, Windows XP 64-bit, Mac OS X, Mac OS X 10.4, Mac OS X 10.5|
|Price:||Free* (*Free Registration Required)|
BIOSTAR G31M+ DRIVER
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, Biostar G31M+ can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand. Biostar G31M+ the brand and product names are trademarks of their respective companies.
Biostar G31M+ Ver. 6.x, LGA775 Socket, Intel Motherboard
Table of Contents Chapter 1: Before you start installing the motherboard, please make sure you follow the instructions below: Hold the board on the edge, do not try to bend or flex Biostar G31M+ board. Loose parts will cause short circuits which may damage the equipment. The package Biostar G31M+ may differ by area or your motherboard version. However, when connecting external microphone to the audio port, please use the Line In blue and Mic In Pink audio jack. Remove Pin Cap before installation, and make good preservation for future use.
Biostar G31M+ Owner's Manual
Pull the socket locking lever out from the socket and then raise the lever up to a degree angle. Look for the triangular cut edge on socket, and the golden dot on CPU should Biostar G31M+ forwards this triangular cut edge. The CPU will fit only in the correct orientation. Hold the CPU down firmly, and then lower the lever to locked position to complete the installation. This completes the installation.
The fan Biostar G31M+ and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire Biostar G31M+ pin 1. System Fan Header 1 3 Note: When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin 2, and the black wire is Ground and should be connected to GND.
Unlock a DIMM slot by pressing the retaining clips outward. Install memory module of the same density Biostar G31M+ pairs, shown in the table. Floppy Disk Connector Biostar G31M+ motherboard provides a standard floppy disk connector that supports K, K, 1.
This connector supports the provided floppy drive ribbon cables. The IDE connector can connect a master and a slave drive, so you can connect up to two hard disk drives. Biostar G31M+
- Download Biostar G31M+ Ver. 6.x Intel Chipset Driver
- BIOSTAR :: Motherboard
- UserBenchmark: Biostar G31M+ Compatible Builds
- For BIOSTAR G31M+ Original Used Desktop G31 Motherboard LGA 775 DDR2 SATA2 USB2.0
- Summary of Contents of owner's manual for Biostar G31M+
- Biostar G31M+ Owner's Manual
PCI-Express supports a raw bit-rate of 2. This PCI slot is designated as 32 bits. Headers for USB 2. Remove AC power line.
Wait for five seconds. INTEL Socket G31M+ Ver. 6.x gaming motherboard's spec: Socket LGA ; Supports Intel Core Biostar G31M+ Quad/Core 2 Duo/Pentium D/Pentium 4/Celeron Dual.
G31M+ Intel G31 Socket LGA Supports Intel Core 2 Quad/Core 2 Duo/Pentium D/Pentium 4/Celeron Dual Core/Celeron Series Processor Supports.