MOXA ICS-G7826A SWITCH DRIVER DETAILS:
|File Size:||15.9 MB|
|Supported systems:||Windows 10, Windows 8.1, Windows 8, Windows 7, Windows 2008, Windows Vista|
|Price:||Free* (*Free Registration Required)|
MOXA ICS-G7826A SWITCH DRIVER
Copyright Notice Moxa Inc. All other trademarks or registered marks in this manual belong to their respective manufacturers. Disclaimer Information in this document is subject to change without notice and does not represent a commitment on the part of Moxa. Moxa provides this document as is, without warranty of any kind, either Moxa ICS-G7826A Switch or implied, including, but not limited to, its particular purpose. Information provided in this manual is intended to be accurate and reliable.
However, Moxa assumes no responsibility for its use, or for any infringements on the rights of third parties that may result from its use. This product might include unintentional technical or typographical errors.
Changes are periodically made to the information herein to correct such errors, and these changes are incorporated into new editions of the publication. Moxa China Shanghai office Toll-free: Introduction 1 to Redundancy Protocol Setting up Redundancy Protocol on your network helps protect critical links against failure, protects against network loops, and keeps network downtime at a minimum. Redundancy Protocol allows you to set up redundant loops in the network to provide a backup data transmission route in the event that a cable is inadvertently disconnected or damaged.
This is a particularly important feature for industrial applications, since it could take several minutes to locate the disconnected or severed cable. For example, if the Moxa switch is used as a key communications component of a production line, several minutes of downtime could cause a big loss in production and revenue. The Moxa switch supports three different protocols to support this Redundancy Protocol function: The following table lists the key differences between the features of each protocol. Use this information to evaluate the benefits of each, and then determine which features are most suitable for your network. Moxa ICS-G7826A Switch to 5 sec.
Turbo Ring refers to the original version of Moxa s proprietary redundant ring protocol, which has a recovery time of under ms. Turbo Ring V2 Moxa ICS-G7826A Switch to the new generation Turbo Ring, which has a recovery time of under 20 ms for Fast Ethernet ports and under 50 ms for Gigabit Ethernet ports. Turbo Chain is a new Moxa proprietary protocol with unlimited flexibility that allows you to construct any type of redundant network topology. The recovery time is under 20 ms for Fast Ethernet ports and under 50 ms for Gigabit Ethernet ports.
To achieve a recovery time under 50 ms in a Gigabit Turbo Chain, we recommend using a Gigabit fiber port as Head port. In this manual, we use the terminology Turbo Moxa ICS-G7826A Switch and Turbo Ring V2 to differentiate between rings configured for one or the other of these protocols.
In fact, Ethernet is often used to integrate video, voice, and high-rate industrial application data transfers into one network. With Gigabit Turbo Ring, if any segment of the network gets disconnected, your automation system will be back to normal in less than ms Moxa ICS-G7826A Switch Ring or 50 ms Turbo Ring V2.
However, firmwares released before edition 5. Doing so will increase the bandwidth of the backbone, and also provide redundancy.
|Sony Vaio VPCF13WFX SmartWi Connection||Summary of Contents of user manual for Moxa ICS-G7826-4GTXSFP-2XG-HV-HV|
|AT TRILINE PROFI I109||ICS-G7828A-4GTXSFP-4XG-HV-HV|
For example, suppose that two physical ports, 1 and 2, are trunked to form trunk Moxa ICS-G7826A Switch Trk1, and then Trk1 is set as one Turbo Ring path. If port 1 gets disconnected, the remaining trunked port, port 2, will Moxa ICS-G7826A Switch the traffic. If ports 1 and 2 are both disconnected, then Turbo Ring will create a backup path within ms. Turbo 2 Ring The following topics are covered in this chapter: The Turbo Ring and Turbo Ring V2 protocols identify one switch as the master of the network, and then automatically block packets from traveling through any of the network s redundant loops.
SPHINXCOMPUTER - Products listed by group
In the event that one branch of the ring gets disconnected from the rest of the network, the protocol automatically Moxa ICS-G7826A Switch the ring so that the part of the network that was disconnected can reestablish contact with the rest of the network. Select any two ports as redundant ports. Connect the redundant ports to form the Turbo Ring. The user does not need to configure any of the switches as the master to use Turbo Ring or Turbo Ring V2. If none of the switches in the ring is configured as the master, then the protocol will automatically assign master status to one of the switches. In fact, the master is only used to identify which segment in the redundant ring acts as the backup path. In the following subsections, we explain how the redundant path is selected for rings configured for Turbo Ring, and Turbo Ring V2. Ring Coupling Configuration For some systems, it may not be convenient to connect all devices in the system to create one BIG redundant ring, since some devices could be located in a remote area.
For these systems, Ring Coupling can Moxa ICS-G7826A Switch used to separate the devices into different smaller redundant rings, but in such a way that they can still communicate with each other. The ICS-GA/ GA series full Gigabit backbone switches are equipped with 24 Gigabit Ethernet ports plus up to 4 10 Gigabit Ethernet ports, and the.
24G+4 10GbE-port Layer 2/Layer 3 full Gigabit managed Ethernet switches The ICS-GA Series is equipped with 24 Gigabit Ethernet ports plus up to 4